Potassium Stearate CAS 593-29-3

CN201510678015.8 provides a material formula that has rather strong wear resistance and anti-slip properties, and the raw products in the formula are very easy to purchase. Throughout the manufacturing procedure, the formula is straightforward and simple to run, which brings fantastic comfort to manufacturers. The technological remedy is to provide a new type of damping and anti-skid material, including: short fibers, water-based adhesive, zinc oxide, antioxidant, stearic acid, photoinitiator, magnesium stearate, potassium stearate, combining agent and carbon fiber. Determined in regards to mass percentage, the brand-new damping and anti-slip material includes: 5-10 parts of short fiber, 0.5-5 parts of water-based adhesive, 3-7 parts of zinc oxide, 1-5 parts of anti-oxidant, 2-8 parts of stearic acid, light 1-5 parts of initiator, 10-13 parts of magnesium stearate, 1-8 parts of potassium stearate, 3-10 parts of coupling agent and 0.5-10 parts of carbon fiber. The helpful results of the creation are: it has relatively solid wear resistance and anti-slip homes, and the raw materials in the formula are very easy to obtain. Throughout the manufacturing process, the formula is easy and extremely easy to run, which brings amazing ease to makers.

CN201611026525.8 Graphene is added to the existing adhesive to change the warmth resistance of the adhesive and boost its bond. The technical solution is: an adhesive based upon graphene change, consisting of partly by weight:

12-30 parts of polyurethane, 15-30 parts of neoprene, 15-30 parts of polyacrylate, 2-12 parts of graphene, 0.8-1.6 parts of triallyl isocyanurate, 1-6 parts of ethylenediamine, 2-10 parts of n-butanol, 2-8 parts of toluene, 0.8-3 parts of potassium stearate, 2-8 parts of polyvinylpyrrolidone, 1-5 parts of N-phenyl-β-naphthylamine;

The prep work technique of the graphene-modified adhesive is as complies with:
Action (1 ): Add graphene to n-butanol and toluene and spread evenly by ultrasonic to obtain mixed choice A;
Activity (2 ): Include polyurethane, chloroprene rubber and polyacrylate into the activator, raise the temperature to 80-105 ° C, react for 1-3 hours, and after that include the combined solution A and triallyl in step (1) isocyanurate, potassium stearate, polyvinylpyrrolidone and N-phenyl-β-naphthylamine are consisted of in the activator in turn, the reaction temperature is gotten used to 150-360 ° C, and the reaction is performed for 2-5 hours to get Mixture B;

Action (3) Stop the above action, wait till the temperature degree goes down to 80 ° C, add ethylenediamine to the reactor, mix similarly, and allow it represent 1 day to prepare graphene-modified adhesive.

In order to reduce the opportunity of high blood pressure, some potassium chloride is currently allowed to be contributed to change sodium chloride in edible salt. Nevertheless, throughout the storage and transport of potassium chloride, the dampness had in the product develops the powder surface to liquify and recrystallize, thus developing crystal bridges in the pores of the powder. As time passes, these crystals incorporate with each other and progressively produce Huge chunks. Decreased fluidness impacts its use in salt. As a result, in order to protect against caking, an ideal amount of anti-caking agent requires to be consisted of throughout the manufacturing procedure.

CN201510599999.0 supplies a composite anti-caking rep taken advantage of in food-grade potassium chloride. The composite anti-caking representative is non-toxic, harmless, colorless and odorless. Technical service: A composite anti-caking representative for food-grade potassium chloride, which is composed of D-mannitol, potassium stearate and calcium dihydrogen phosphate, in which D-mannitol, potassium stearate and phosphoric acid The details gravity of calcium dihydrogen is (1.25 ~ 5): (0.1 ~ 0.4):1. The purity of the D-mannitol, potassium stearate and calcium dihydrogen phosphate are all food quality.

Add a method, consisting of the adhering to steps:
Action 1. Mix D-mannitol, potassium stearate and calcium dihydrogen phosphate with a certain gravity of (1.25 ~ 5): (0.1 ~ 0.4):1 and grind them right into powder to develop a composite anti-caking representative;

Activity 2: Similarly mix the composite anti-caking rep and the ended up potassium chloride item at a mass percentage of 1: (10 to 100) to create a semi-finished item;

Step 3: Include the semi-finished product to the fresh dried out potassium chloride at a mass ratio of 1: (20-200).

A damp enhancement method for a composite anti-caking rep for food-grade potassium chloride, consisting of the adhering to steps:
Action 1. Mix D-mannitol, potassium stearate and calcium dihydrogen phosphate with an information gravity of (1.2

5 ~ 5): (0.1 ~ 0.4):1 and grind them right into powder to develop a composite anti-caking representative;

Action 2: Evenly blend the composite anti-caking agent and water at a mass percentage of 1: (100 ~ 200) to establish an anti-caking representative aqueous alternative;
Step 3: Include the anti-caking representative aqueous service to the mama alcohol of potassium chloride recrystallization. The mass percentage of the composite anti-caking representative and potassium chloride wound up item is 1:5000 ~ 10000.

Compared to the previous art, the benefits these days advancement are:
1. The anti-caking representative of the here and now technology is anemic or somewhat white and does not alter the whiteness of potassium chloride;

2. The anti-caking representative these days invention does not have cyanide and is non-toxic and safe.

Polyethylene polypropylene is a new product that has been utilized in current times. Polyethylene polypropylene is made from polypropylene non-woven product and polyethylene as the main sources, which are treated with anti-aging agents and are magnified with high modern technology, new development and new procedures. The polymer polyethylene polypropylene composite water immune roll product with bundled layers has lots of elements such as large rubbing coefficient, excellent security, high mechanical endurance, little linear expansion coefficient, huge temperature versatility selection, exceptional chemical resistance, weather resistance, and flexibility. Attributes, is a perfect brand-new century green eco-friendly item. CN201711266977.8 offers a preparation technique of polymer polyethylene polypropylene water resistant membrane layer, including the adhering to preparation steps:

1) Weigh the raw materials according to the adhering to weight parts: 80-130 parts of polyethylene material, 10-20 parts of talc, 5-10 parts of silica fume, 5-10 parts of glass grains, 8-16 parts of potassium stearate, carboxyl 8-18 parts of styrene-butadiene latex, 10-20 parts of anti-oxidant;

2) Place talc, silica fume, potassium stearate and carboxyl styrene-butadiene latex right into a high-speed mixer, raise the temperature to 70-80 ° C, mix for 8-18 minutes at high speed, and afterwards raise the temperature to 95-100 ° C., consist of polyethylene resin and glass grains, and mix at broadband for 10-20 minutes to get a combination;

3) Area the mixed product right into the feeding place, extrusion molding, end up the substance of polypropylene textile and plastic sheet by means of a three-roller tools, experience the overview roller to the tractor, cut the sides, and enter into the coiler to acquire the product.

Contrasted to the existing modern-day technology, the helpful outcomes of the here and now creation are:
In the strategy of today creation, via the collaborating result of polyethylene material, talcum powder, silica fume, glass beads, potassium stearate, carboxyl styrene-butadiene latex, anti-oxidant, and being successful prep job activities, particularly when blending at broadband, each The order of inputting basic materials is specifically critical. Integrated with the order these days development, the ready polymer polyethylene polypropylene waterproofing membrane layer has better effectiveness in all aspects than the performance index of the first part of the GB18173.1-2012 polymer waterproofing membrane layer (FS2). Call for.